Hallo harp bro+where I can buy some mic element for broken BluesBlaster

[Zoran]

I don't remember there has been day like this - so little of you at news
group. What happened, don't like harp, blues harp, harpin', playin' the
blues. What happened with our group, bad omen, somethnig wrong with us, or
wuth group. I can't believe that nobody's care for our harp news group.
Best regard, Zoran.

Well, I have problem or two, something happened with my Bluesblaster, don't
work, I think element burned out, cause that searching for replaced element,
maybe take some vintage but for Bluesblaster. Then I hope somebody knows
wich cables I need for Bluesblaster, I buy couple of before but didn't work,
maybe I burned out mic with wrong cables.

Appreciate any answer.

Thanks, Zoran.

[Johnny]

Zoran,

I ain't no electrician, but I can tell you this. I had a mic quit on me
recently and I falsely assumed at first that it was the element. Wrong. I
swapped the cable for another cable that I tested and knew it was good, and
I found out that there is a loose connection in the old cable. Easy, much
less expensive fix than a vintage element.

Moral - Try before you buy.
Disclaimer - Your mileage may vary.
--
Johnny

Post by Zoran
I don't remember there has been day like this - so little of you at news
group. What happened, don't like harp, blues harp, harpin', playin' the
blues. What happened with our group, bad omen, somethnig wrong with us, or
wuth group. I can't believe that nobody's care for our harp news group.
Best regard, Zoran.
Well, I have problem or two, something happened with my Bluesblaster,
don't work, I think element burned out, cause that searching for replaced
element, maybe take some vintage but for Bluesblaster. Then I hope
somebody knows wich cables I need for Bluesblaster, I buy couple of before
but didn't work, maybe I burned out mic with wrong cables.
Appreciate any answer.
Thanks, Zoran.

[T-Bone Bruce]

Post by Johnny
Zoran,
I ain't no electrician, but I can tell you this. I had a mic quit on me
recently and I falsely assumed at first that it was the element. Wrong. I
swapped the cable for another cable that I tested and knew it was good, and
I found out that there is a loose connection in the old cable. Easy, much
less expensive fix than a vintage element.
Moral - Try before you buy.
Disclaimer - Your mileage may vary.
--
Johnny

Post by Zoran
I don't remember there has been day like this - so little of you at news
group. What happened, don't like harp, blues harp, harpin', playin' the
blues. What happened with our group, bad omen, somethnig wrong with us, or
wuth group. I can't believe that nobody's care for our harp news group.
Best regard, Zoran.
Well, I have problem or two, something happened with my Bluesblaster,
don't work, I think element burned out, cause that searching for replaced
element, maybe take some vintage but for Bluesblaster. Then I hope
somebody knows wich cables I need for Bluesblaster, I buy couple of before
but didn't work, maybe I burned out mic with wrong cables.
Appreciate any answer.
Thanks, Zoran.- Hide quoted text -

- Show quoted text -

Hi Zoran. The Blues Blaster uses a special "pin 3 hot" XLR cable. Most
XLR cables are pin 2 hot. Using the wrong cable will not damge the
microphone though. Did your Blues Blaster come with a cable? If not it
might be the wrong type of cable that you have bought.
I will send you an email.....
Bruce

[Zoran]

Post by Johnny
Zoran,
I ain't no electrician, but I can tell you this. I had a mic quit on me
recently and I falsely assumed at first that it was the element. Wrong. I
swapped the cable for another cable that I tested and knew it was good,
and I found out that there is a loose connection in the old cable. Easy,
much less expensive fix than a vintage element.
Moral - Try before you buy.
Disclaimer - Your mileage may vary.
--
Johnny

Johnny, thanks for the answer. I will try with another cable.

[Rubber Dubber 2]

Post by Zoran
I don't remember there has been day like this - so little of you at news
group. What happened, don't like harp, blues harp, harpin', playin' the
blues. What happened with our group, bad omen, somethnig wrong with us, or
wuth group. I can't believe that nobody's care for our harp news group.
Best regard, Zoran.
Well, I have problem or two, something happened with my Bluesblaster, don't
work, I think element burned out, cause that searching for replaced element,
maybe take some vintage but for Bluesblaster. Then I hope somebody knows
wich cables I need for Bluesblaster, I buy couple of before but didn't work,
maybe I burned out mic with wrong cables.
Appreciate any answer.
Thanks, Zoran.

You might be able to get some answers at:

http://www.jt30.com/jt30page/index.html

lottza info on mics etc.

[Zoran]

Post by Rubber Dubber 2
http://www.jt30.com/jt30page/index.html
lottza info on mics etc.

Thank you RD2